Application of microwave holographic subsurface technology for non-destructive testing of reinforced polyurethane foam

Main Article Content

Sergey Ivashov
Vladimir Razevig
Andrey Zhuravlev

Abstract

Abstract. Glass fiber Reinforced Polyurethane Foam (RPUF) has found wide application primarily in the aerospace and construction industry due to its outstanding properties. Unlike pure non-reinforced Polyurethane Foam (PUF), it has increased strength characteristics and at the same time retains unique heat and sound insulation properties. The paper considers the features of reinforced polyurethane foam examination in the Microwave (MW) range. It is shown that there is a significant difference in the recorded MW images compared to pure polyurethane foam. This is expressed primarily in the fact that the reinforcing fibers have a dielectric constant that is different from enclosing polyurethane foam, which leads to scattering and reflection of the incident electromagnetic wave on them. Experimental studies have shown that for RPUF, in contrast to PUF, there is an optimal wavelength range in which the contrast of defects against the background of glass fiber reflections is of the greatest value. An experimental comparison of two methods of examination back-scattering and forward-scattering methods was also carried out for RPUF. It is shown that the forward-scattering technology of measurements, if it can be implemented, has certain advantages since allows reducing the contrast of background reflections from the reinforcing fibers.

Downloads

Download data is not yet available.

Article Details

Sergey Ivashov, Vladimir Razevig, & Andrey Zhuravlev. (2023). Application of microwave holographic subsurface technology for non-destructive testing of reinforced polyurethane foam. Innovations in Aerospace Science and Technology, 001–004. https://doi.org/10.17352/iast.000001
Articles

Copyright (c) 2023 Razevig V, et al.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Licensing and protecting the author rights is the central aim and core of the publishing business. Peertechz dedicates itself in making it easier for people to share and build upon the work of others while maintaining consistency with the rules of copyright. Peertechz licensing terms are formulated to facilitate reuse of the manuscripts published in journals to take maximum advantage of Open Access publication and for the purpose of disseminating knowledge.

We support 'libre' open access, which defines Open Access in true terms as free of charge online access along with usage rights. The usage rights are granted through the use of specific Creative Commons license.

Peertechz accomplice with- [CC BY 4.0]

Explanation

'CC' stands for Creative Commons license. 'BY' symbolizes that users have provided attribution to the creator that the published manuscripts can be used or shared. This license allows for redistribution, commercial and non-commercial, as long as it is passed along unchanged and in whole, with credit to the author.

Please take in notification that Creative Commons user licenses are non-revocable. We recommend authors to check if their funding body requires a specific license.

With this license, the authors are allowed that after publishing with Peertechz, they can share their research by posting a free draft copy of their article to any repository or website.
'CC BY' license observance:

License Name

Permission to read and download

Permission to display in a repository

Permission to translate

Commercial uses of manuscript

CC BY 4.0

Yes

Yes

Yes

Yes

The authors please note that Creative Commons license is focused on making creative works available for discovery and reuse. Creative Commons licenses provide an alternative to standard copyrights, allowing authors to specify ways that their works can be used without having to grant permission for each individual request. Others who want to reserve all of their rights under copyright law should not use CC licenses.

Report of Columbia Accident Investigation Board. 2003; I. https://www.nasa.gov/columbia/home/CAIB_Vol1.html

Dornheim MA. External tank makeover. Aviation Week & Space Technology. 2004; 57–61.

Kharkovsky S, Hepburn F, Walker J, Zoughi R. Nondestructive Testing of the Space Shuttle External Tank Foam Insulation Using Near Field and Focused Millimeter Wave Techniques. Materials Evaluation. 2005; 63.

Kharkovsky S, Zoughi R. Microwave and millimeter wave nondestructive testing and evaluation. IEEE Instrum Meas Mag. 2007; 10(2): 26–38.

Lu T, Snapp C, Chao TH, Thakoor A, Bechtel T, Ivashov S, Vasiliev I. Evaluation of holographic subsurface radar for NDE of space shuttle thermal protection tiles. Sensors and Systems for Space Applications. Proceedings of SPIE 2007; 6555: OS1-8.

Ivashov SI, Vasiliev IA, Bechtel TD, Snapp C. Comparison between Impulse and Holographic Subsurface Radar for NDT of Space Vehicle Structural Materials. Progress in Electromagnetics Research Symposium (PIERS 2007). Beijing, China. 2007; 1816–1819.

Dombrow BA. Polyurethanes, Reinhold Publishing Corporation, New York, 1957.

Ivashov SI, Razevig VV, Zhuravlev AV, Bechtel T, Chizh MA. Comparison of Different NDT Methods in Diagnostics of Rocket Cryogenic Tanks Thermal Protection Coating. 2019 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems (COMCAS). Tel-Aviv, Israel. 2019; 1-5. DOI: 10.1109/COMCAS44984.2019.89581577.

Siegmann A, Kenig S, Alperstein D, Narkis M. Mechanical behavior of reinforced polyurethane foams. Polymer composites. 1983; 2: 113-111. https://doi.org/10.1002/pc.750040206

Ivashov S, Zhuravlev A, Razevig V, Chizh M, Bechtel T, Capineri L, Thomas B. Frequency Influence in Microwave Subsurface Holography for Composite Materials Testing. Proceedings of the 17th International Conference on Ground Penetrating Radar, GPR 2018, Rapperswil, Switzerland, 2018; 98-103. DOI: 10.1109/ICGPR.2018.8441592

Case JT, Hepburn FL, Zoughi R. Inspection of Spray on Foam Insulation (SOFI) Using Microwave and Millimeter Wave Synthetic Aperture Focusing and Holography. 2006 IEEE Instrumentation and Measurement Technology Conference Proceedings. 2006; 2148–2153. doi: 10.1109/IMTC.2006.328527.

Zhuravlev A, Razevig V, Chizh M, Ivashov S, Bugaev A. Non-destructive testing at microwaves using a vector network analyzer and a two-coordinate mechanical scanner. 2016 16th International Conference on Ground Penetrating Radar (GPR). 2016; 1–5. doi: 10.1109/ICGPR.2016.7572627.

GABOR D. A new microscopic principle. Nature. 1948 May 15;161(4098):777. doi: 10.1038/161777a0. PMID: 18860291.

Junkin G, Anderson AP. Limitations in microwave holographic synthetic aperture imaging over a lossy half-space, radar, and signal processing. IEE Proc-F. 1988; 135(4): 321-329.

Sheen DM, McMakin DL, Hall TE. Three-dimensional millimeter-wave imaging for concealed weapon detection. IEEE Transactions on Microwave Theory and Techniques. 2001; 49: 9: 1581-1592.

Razevig V, Ivashov S, Vasiliev I, Zhuravlev A. Comparison of Different Methods for Reconstruction of Microwave Holograms Recorded by the Subsurface Radar. In Proceeding of the 14th International Conference on Ground Penetrating Radar, Shanghai, China. 2012; 335–339. https://doi.org/10.1109/ICGPR.2012.6254884.

https://technonicol.com/

Razevig VV, Bugaev AS, Ivashov SI. Comparison of Back-Scattering and Forward-Scattering Methods in Short Range Microwave Imaging Systems. Technical Physics. 2022; 67: 11. DOI: 10.21883/TP.2022.11.55184.173-22.

Moll J, Maetz T, Maelzer M. Radar-based monitoring of glass fiber reinforced composites during fatigue testing. Struct Control Health Monit. 2021; 28(10):e2812. https://doi.org/10.1002/stc. 2812

Filinskyy LA. Solution of the Direct Problem of Electromagnetic Waves Propagation in Foams. Proceedings of 21 International Seminar /Workshop on Direct and Inverse Problems of Electromagnetic and Acoustic Wave Theory (DIPED’16). Tbilisi, Georgia. 2016; 46-48. DOI: 10.1109/DIPED.2016.7772208